Stripping Solution

Description

Cleaning And Sealing Products Stripping Solution – Powerful Water-Based Coating & Paint Remover

Cleaning And Sealing Products Stripping Solution is a safe, water-based gel designed to effectively remove paints, sealers, coatings, and stubborn surface treatments from a variety of external hard surfaces. Unlike harsh solvent-based strippers, this low-odour, non-caustic formula is much safer to handle and use, making it ideal for both DIYers and professionals.

Whether you’re stripping back old layers of paint, failed sealers, or heavy-duty coatings, Cleaning And Sealing Products Surface Stripper works deep into the material to break down unwanted residues, leaving the surface clean and ready for re-coating or restoration.

Key Benefits:

✔ Water-based formula – safer and more environmentally friendly
✔ Gel consistency – clings to vertical and overhead surfaces without dripping
✔ Suitable for use on concrete, stone, brick, and masonry
✔ Removes acrylics, polyurethane, sealers, emulsions, masonry paints, and more
✔ No strong odours, safer to work with in outdoor areas
✔ Easy to apply with brush or roller

Where to Use:

• Driveways and patios

• Walls, steps, and stone features

• Garage floors and paths

• Any hard, absorbent external surface needing coating or paint removal

How to Apply:

1. Surface Prep:

   • Always test on a small hidden area first to check compatibility and understand removal time.

   • Mask off any adjacent sensitive or painted areas to prevent accidental damage.

2. First Coat:

   • Apply a thick, generous layer of Stripping Solution using a brush or roller.

   • Do not spread it too thin – it needs to remain wet and coated to work effectively.

   • Leave it on the surface for at least 20 minutes.

3. Second Coat:

   • Without removing the first coat, apply a second thick layer directly over the top.

   • Leave for another 20 minutes.

4. Rinse Off:

   • Use a pressure washer to rinse from the bottom upwards to avoid washing product down over areas you haven’t worked on yet.

   • For thicker or multi-layered coatings, you may need to cover the area with plastic sheeting and leave overnight (8–12 hours) before washing off.

Important Notes:

Do not let the gel dry out while working – if it dries, the coating may reset.

Avoid applying to a wet surface – moisture can reduce performance.

Always collect and dispose of any residue and debris responsibly. Do not allow the product or washed-off material to enter drains or waterways.

PPE (Personal Protective Equipment):

• Eye protection

• Chemical-resistant gloves

• Protective clothing or overalls

Coverage:

• Up to 2m² per litre per coat, depending on the surface texture and thickness of the coating.

Cleaning And Sealing Products Surface Stripper is your go-to solution for stripping old or failed coatings quickly and safely. With its easy application and powerful gel formula, it makes removing unwanted layers stress-free—leaving your surfaces clean, restored, and ready for a fresh finish.